Exhibitor Conferences

Room

Company/Title/ Conference summary

Monday, September 25

5.00pm

Room B

Third-party damage prevention, “Our everyday challenge”
IAPG

Lecturers: Mr. Fernando Shigihara (Head of damage Prevention and Location Class), Mr. Marcos Gerardo Palacios (Damage Prevention, Location Class and Interference Management), Mr. Juan Alberto Kindsvater (Interference Management), Mr. Jorge Daniel Palumbo (Gas pipeline surveillance, Gas pipe removal, Damage Prevention and Interference Management), Mr. Héctor Curcio (Damage Prevention Program Coordinator- YPF), Mr. Sergio Ricardo Martín (Damage Prevention, Location Class and Interference Management)

6.00pm

Room A

International Forum on Financial Cooperation in the Oil & Gas Sector
Shandong Kerui Petroleum Equipment Co. Ltd


Pre-registration required. To register, please contact Harry Lau: liuhai@keruigroup.com

 

*The Conference will be in Spanish with simultaneous interpreting into Chinese.

Room B

Tubing and Casing Thread Inspection
Duralitte

Lecturer: Mr Eric Otten de Gagemaker

The new generation in Thread Inspection by Eric Otten: Influence of diameter and crest ovality: Effects of ovality on standoff, crest diameter effect on Drafting, element correlation for a suitable control.

 

*The Conference will be in English with simultaneous interpreting into Spanish

7.00pm

Room B

Kevlar® for the Oil and Gas sector
Dupont

Lecturer: Mr. Adriano C. Mendonça – LATAM Technical Expert.

Kevlar® is five times stronger than steel, extremely resistant and will not corrode with water and is also highly resistant to different chemicals used in the Oil and Gas industry. This fiber has been used in flexible ducting, marine hoses and thermoplastic pipes to reinforce them, since they are exposed to extreme conditions both offshore and onshore.

Tuesday, September 26

3.00pm

Room A

Innovation and development for the Oil & Gas industry
Huinoil S.A.

Lecturers: Mr. Enrique Arreguez – Mr. Diego Jerez

Presentation of mechanical seal and stem lubricator. Proprietary developments that offer significant savings in production costs.

Room C

Aggreko – Process Cooling Solutions
Aggreko

Lecturer: Mr. Hernan Michini - Solutions specialist for the Oil and Gas sector

Benefits derived from process cooling solutions in the Oil and Gas industry. Practical and innovative examples applicable to the sector.

4.00pm

Room A

Lifting safety/Disposal criteria
Ortiz Fischer y CIA S.A.

Lecturer: Ba. Carlos Kondracki

Load lifting safety and criteria for material disposal

Room B

Technical Service Specialist Kevlar® LA
Dupont

Lecturer: Mrs. Aline Mora

The European standard EN388 has been modified and is already being used in Europe. This modification influences the level of protection of protective gloves and will be implemented in Latin America shortly. The full understanding of the new tests, levels of cut protection and the performance of the main materials under this new scenario is essential to ensure the best safety option. Based on the aforementioned and on the market jobs, DuPont has developed new models of Kevlar® gloves, fully compliant with industry standards and performance levels and capable of adapting to every application.

Room C

Fracking
Ecopreneur

Lecturer: Mr. Miguel Damiano

5.00pm

Room A

Fire pumps on skids in accordance with NFPA 20
BOMBAS GRUNDFOS DE ARGENTINA S.A.

Lecturer: Mr. Giorgio Garbini

Options and advantages of our fire pumps on a skid. The different possible options. These solutions are made-to-order and are fully compliant with NFPA 20.

Room B

API 685 pumps (without mechanical seal) and totally leak-free
Estopaplast S.A.

Lecturers: Eng. Peter Hans Koegl (President - Hermetic Pumpen GmbH) - Eng. Alejandro Fuhrmann (Vice President - Estopaplast S.A.)

We introduce the canned rotor pump technology, without mechanical seal (API 685 compliant) of our Principal: Hermetic Pumpen GmbH.

Room C

Power Solutions for the Unconventional market
Aggreko
Lecturer: Mr. Esteban Coppolillo - Business Development Manager

Company’s experiences and understanding of distributed power generation aimed at process improvement and operating cost reduction.

6.00pm

Room A

Exterran: providing solutions to accelerate return on investment (ROI).
 Exterran: Providing Solutions for Early Monetization
EXTERRAN

Lecturer: Eng. Luciano Calloni

For over 60 years, Exterran Corporation has been the leader as a provider of infrastructure solutions to the power industry worldwide, helping to lower operational and financial risk to operators around the globe.
Headquartered in Houston, with strategic regional offices and manufacturing facilities around the world, enabling us to assist and provide support to customers locally.

Room B

Third-party Damage Prevention, “Our everyday challenge”
IAPG

Lecturers: Mr. Fernando Shigihara (Head of Damage Prevention and Location Class), Mr. Marcos Gerardo Palacios (Damage Prevention, Location Class and Interference Management), Mr. Juan Alberto Kindsvater (Interference Management), Mr. Jorge Daniel Palumbo (Gas pipeline surveillance, pipe removal, Damage Prevention and Interference Management), Mr. Héctor Curcio (Damage Prevention Program Coordinator- YPF), Mr. Sergio Ricardo Martín (Damage Prevention, Location Class and Interference Management)

Room C

Solutions for the future: innovative solutions for gas compression and treatment
Industrias Juan F. Secco S.A.

Lecturers: Mr. Sebastián Martinovic (Manager - Gas Compression and Treatment) – Mr. Lucas Marquina (Business Manager)

Introduction to the Company’s solutions for the Oil & Gas sector, with the emphasis on the design and equipment packaging that cover the midstream needs.

7.00pm

Room A

Certified electric arc protection clothing

Lecturer: Ba. Claudia Ruibal

 

Presentation of the first line of certified clothing in accordance with Res. 896 with “S” seal. Scope, legal and regulatory framework.

Room B

Thread Inspection for rotary drilling
Duralitte

Lecturer: Mr. James Douglas

Pitch Diameter Inspection: Modern, new instruments to inspect connections, placing an emphasis on: the pitch diameter of threads, the control of new connections and certification of wear connections, as well as on how to monitor and assess the wear in connections.

 

* The Conference will be in English with simultaneous interpreting into Spanish

Wednesday, September 27

3.00pm

Room A

Extending the life of gas turbine components through advanced repair techniques

Del Plata Ingeniería

Lecturers: Eng. Federico Cervino – MSc . Miguelina Curcio

 

The execution of scheduled maintenance of gas turbines requires, primarily, the hot swapping of components. This represents between 60 and 80% of the maintenance costs, which can be dramatically reduced by running restoration programs and/or asset life extension programs by implementing improvement and repair technologies

Room C

Aggreko – Process Cooling Solutions
Aggreko

Lecturer: Mr. Hernan Michini - Solution specialist for the Oil and Gas sector
 

Benefits derived from process cooling solutions in the Oil and Gas industry. Practical and innovative examples applicable to the sector.

4.00pm

ROOM A

Lifting safety/Disposal criteria
Ortiz Fischer y CIA S.A.

Lecturer: Ba. Carlos Kondracki

Load lifting safety and criteria for material disposal

Room B

Tubing and Casing Thread Inspection
Duralitte

Lecturer: Mr. Eric Otten de Gagemaker
 

The new generation in Thread Inspection by Eric Otten: Influence of diameter and crest ovality: Effects of ovality on standoff, crest diameter effect on Drafting, element correlation for a suitable control.
 

 

* The Conference will be in English with simultaneous interpreting into Spanish

Room C

Power Solutions for the Unconventional market
Aggreko
Lecturer: Mr. Esteban Coppolillo - Business Development Manager

Company’s experiences and understanding of distributed power generation aimed at process improvement and operating cost reduction.

5.00pm

Room A

Water technology and services for the Upstream
Veolia
Lecturer: Eng. Cristina Dambrosio

Description of Upstream technologies and case studies

Room B

Power Led Lighting
Bael

Lecturers: Eng. Daniel Díaz – Mr. Román Bertachini

Power led lighting. Searchlights. Towers and non-incendive electrical equipment

Room C

Upgrades and retrofits of rotating equipment control systems
BLC

Lecturer: Eng. Mario Casaccia (Research, Development and Innovation Coordinator).

Solution provided by BLC Global Engineering Services to upgrade the control systems of rotating equipment, designed to increase efficiency and reduce the total cost of ownership.

6.00pm

Room A

Introducing multidirectional scaffolding systems
CIMSA
Lecturer: Mr. Mariano Azcuy

Scaffolding types and components. Safety standards. Basic assembly. Problems and possible solutions.

ROOM B

Third-party Damage Prevention, “Our everyday challenge”
IAPG

Lecturers: Mr. Fernando Shigihara (Head of Damage Prevention and Location Class), Mr. Marcos Gerardo Palacios (Damage Prevention, Location Class and Interference Management), Mr. Juan Alberto Kindsvater (Interference Management), Mr. Jorge Daniel Palumbo (Gas pipeline surveillance, pipe removal, Damage Prevention y Interference Management), Mr. Héctor Curcio (Damage Prevention Program Coordinator- YPF), Mr. Sergio Ricardo Martín (Damage Prevention, Location Class and Interference Management)

Room C

Solutions for the future: flexible and efficient power generation
Industrias Juan F. Secco S.A.

Lecturers: Mr.  Javier Olivero (Operations Manager) – Mr. Lucas Marquina (Business Manager)

With the future in mind, we will analyze the changes that the Power Sector is experiencing due to the growth of new forms of power generation and the technological advances. In this context, Secco solutions for the Oil & Gas sector will be presented, focusing on these two pillars of its services: efficiency and flexibility.

7.00pm

Room B

Comprehensive solutions for thermal insulation with Polyurethane (PU) Foam
Socotherm Americas S.A.

Lecturer: Mrs. Bárbara Scalise

Solutions for Onshore and Offshore piping and field joints. Production processes. Thermal designs. Preservation, inventory and transportation.

Room C

Concealed, mobile Flare Systems with a low environmental and social impact
Flargent S.A.  

Lecturers: Eng. Nicolás Giannni (Technology) – Mrs. Magdalena Mazza (Head of Engineering) – Mr. Federico Patti (Engineering Manager) – Mr. Jaime Arias (Director of Engineering and Technology)

Motivated by the necessity to reduce the environmental and social impact of flaring operations during flow back and well testing in residential and farming areas, Flargent has developed a mobile gas flaring system, which is ready to conceal hydrocarbon combustion through low luminosity and noise and smoke reduction from such operations.

8.00pm

Room A

Storage tanks equipment
Pefow Equipamientos S.A.

Lecturers: Mrs. Jimena Di Lorenzo – Mr. Fernando Pereyra

Equipment and environmental protection. Tank vent systems and accessories. Blanketing systems. Gas filtering. Floating suction assemblies.

Thursday, September 28

4.00pm

Room B

Technical Service Specialist Nomex® LA
Dupont

Lecturer: Mr. Lucas Loureiro

There are many risks associated to protection when exposed to sudden fire in the oil & gas industry. Therefore, it is a must to know the actual nature of these risks in order to face them. This talk will examine the different types of risks and protection, through theoretical and practical examples.

6.00pm

Room A

Pumps and equipment with pressures up to 65,000 psi
ABAC S.R.L.

Lecturer: Eng. Lisandro Vidal

Pumps and boosters . Operation and performance. Connectors and valves for high-pressure applications. Pressure-generating equipment.

Room B

Third-party Damage Prevention, “Our everyday challenge”
IAPG

Lecturers: Mr Fernando Shigihara (Head of Damage Prevention and Location Class), Mr Marcos Gerardo Palacios (Damage Prevention, Location Class and Interference Management), Mr Juan Alberto Kindsvater (Interference Management), Mr Jorge Daniel Palumbo (Gas pipeline surveillance, pipe removal, Damage Prevention and Interference Management), Mr Héctor Curcio (Damage Prevention Program Coordinator- YPF), Mr Sergio Ricardo Martín (Damage Prevention, Location Class and Interference Management)

Room C

Thread Inspection for rotary drilling
Duralitte

Lecturer: Mr James Douglas

Pitch Diameter Inspection: Modern, new instruments to inspect connections, placing an emphasis on: the pitch diameter of threads, the control of new connections and certification of wear connections, as well as on how to monitor and assess the wear of the connections.

 

* The Conference will be in English with simultaneous interpreting into Spanish